AMC625

Analog headphone amplifier

               

AMC625 contains six headphone amplifiers, offering a remote volume control possibility. A specific design allows a particular configuration of each cell. Possibility to choose the same signal as the left cell, or the input signal of the particular cell (1 to 6, two times 2 to 1, three times 1 to 2...

All the headphones of the AMC625 are equipped with VCA allowing to control the volume either via the front panel switching, or via a remote control. The external control can be applied either on only headphone1, or on headphones 2 to 6, or all headphones.

AMC625 comprises 2 distinct talkback inputs. The talkback1 is routed to the headphone1, the talkback 2 is routed to the headphone 2 to 6, via the resence modulation start.

AMC625 comprises a device allowing to limit, on sixteen levels, the maximum volume level on headphones. This device will be very appreciate in media library, to avoid too much acoustic pressure for guests.

Signal and talkback inputs use standard RJ45. A RJ45 stereo channel is balanced. This way of wiring becomes more and more common, and allows use of network wire.

A unit of VCA remote control and headphone output is available under AMC616 reference. It is used to make the cabling easier with the ampli headphone, AMC625.

 

USES:

  • Headphones dispatching in audio and video environment.
  • Everywhere a gain remote control is needed.
  • Complete managing of two headphone modulations and from distinct talkback.
AMC625
4.20 Kg
1U - 19"
483 x 44 x 230 mm

3ans francais